Jumat, 05 November 2010

router dinamis dengan packet tracer

Buat 3 buah router dengan konfigurasi awal sebagai berikut :
nb : buat dengan RouterPT-Empty dengan 2 FastEthernet dan 2 Serial

dan laksanakan konfigurasi seperti dibawah ini .

Router#conf ter
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastethernet 0/0
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
Router(config-if)#interface fastethernet 1/0
Router(config-if)#no shutdown


Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
Router(config-if)#interface serial 2/0
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#clock rate 9600
Router(config-if)#interface serial 3/0
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial3/0, changed state to down
Router(config-if)#clock rate 9600

== KONFIGURASI IP ROUTER ==

Pada Router 1

Router>en
Router#conf ter
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastethernet 0/0
Router(config-if)#ip address 192.168.3.254 255.255.255.0
Router(config-if)#interface serial 2/0
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#interface serial 3/0
Router(config-if)#ip address 192.168.2.1 255.255.255.0

Pada Router 0

Router#conf ter
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastethernet 0/0
Router(config-if)#ip address 192.168.5.1 255.255.255.0
Router(config-if)#interface serial 2/0
Router(config-if)#ip address 192.168.1.254 255.255.255.0


Pada Router 2

Router#conf ter
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastethernet 0/0
Router(config-if)#ip address 192.168.4.1 255.255.255.0
Router(config-if)#interface serial 2/0
Router(config-if)#ip address 192.168.2.2 255.255.255.0

== KONFIGURASI PC ==

ROUTER 0
PC 1 : IP 192.168.5.2 GW 192.168.5.1
PC 2 : IP 192.168.5.3 GW 192.168.5.1

ROUTER 1
PC 1 : IP 192.168.3.1 GW 192.168.3.254
PC 2 : IP 192.168.3.2 GW 192.168.3.254

ROUTER 2
PC 1 : IP 192.168.4.2 GW 192.168.4.1
PC 2 : IP 192.168.4.3 GW 192.168.4.1

== KONFIGURASI RIP ROUTER ==

Router 0

Router#conf ter
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router rip
Router(config-router)# network 192.168.2.0
Router(config-router)# network 192.168.3.0
Router(config-router)# network 192.168.4.0

Router 1

Router#conf ter
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router rip
Router(config-router)# network 192.168.4.0
Router(config-router)# network 192.168.5.0

Router 2

Router#conf ter
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router rip
Router(config-router)# network 192.168.1.0
Router(config-router)# network 192.168.2.0
Router(config-router)# network 192.168.3.0
Router(config-router)# network 192.168.5.0


Lanjut membaca “router dinamis dengan packet tracer”  »»